SINBRAN® Modules for Installation on the Raw-gas or the Clean-gas side
SINBRAN® Standard Filter elements consist of 8, 12 or 18 tubes. The tubes are mounted on a flange and the other side of the tubes is closed by a bottom plate. The standard length of the elements are 950, 1260 and 1500mm. Special dimensions are available upon request.
The elements are available for bottom or top removal installation.
In addition the elements are available in antistatic or PWIS-free version (PWIS = paint wetting impairment substances).
SINBRAN®Filter elements combine the strength of membrane filtration with rigid body technology. The ePTFE membrane ensures high filtration efficiency combined with low pressure loss. The rigig supporting tube offers a strong robustness which cannot be achieved the bag filters or spun-bond elements.
The combination of the rigid body and membrane also offers other advantages:
ePTFE Membrane is an easy-to-clean surface:
SINBRAN® filter elements operate extremely reliable in jet-pulse systems, as powder rarely sticks to the ePTFE membrane surface. In addition the membrane prevents dust of penetrating the rigid support body.
Easy removal of sticky or crusty filter cake:
The rigid body of SINBRAN® is easy to remove from the collector and cleaned manually. Please follow cleaning instructions!
At product change through a CIP system the non-stick ePTFE surface offers ideal cleanability.
SINBRAN® filter elements are also available as antistatic versions.
1. Low emissions:
The microfine structure of the ePTFE membrane ensures filtration efficiency > 99,9 %
2. Low pressure drop:
Double throughput possible at same pressure drop
3. 100 % PTFE membrane:
The material with the best anti-adhesive properties
4. Long life:
An operating life in excess of six years is not a rarity
|Tubes||Porous HD PE (High Density Polyethylene)|
|Membrane||100 % ePTFE|
|Flange||Polyethylene, Stainless Steel, Polyethylen with carbon black embedded|
|Installation||Raw-gas side or Clean-gas side|
|Standard Versions||8, 12 or 18 Tubes per Element|
|Other Variation||On Request|
|Length||Minimum length 495 mm, maximum length 1500 mm|
|Washable||Yes. Please follow instructions!|
|Continuous operating temperature||70 °C (without chemical attack, vertical installation only)|
|Peak temperature||75 °C (< 10 minutes)|
|Differential Pressure||Double throughput possible at same pressure drop|
|Antistatic version||Surface resistance < 108 Ω (IEC 60079-1 and -2)|
All data expressed are typical values. This technical data is subject to change. For more information please contact Sinbran GmbH. www.sinbran.com
- Clean-gas side or Raw-gas side filter elements available
- Vertical installation is standard, horizontal installation is possible under certain conditions.
- Compatibility with other rigid-body filter elements (Dimensions needs to be checked carefully).
- Combining different element-sizes allows the maximum filtration area to be fit into a round bag house.